Corvette C8 ZR1 Front Bumper Vented Extractor Hood
Corvette C8 ZR1 Front Bumper Vented Extractor Hood
Extreme Online Store
Couldn't load pickup availability
- ✔ Verified fitment & authentic brands
- ✔ Secure checkout via Shopify, Stripe, and PayPal
- ✔ Enthusiast-run support — not a marketplace
- ✔ Fair resolution on damaged or incorrect orders
Every product is sourced from authorized manufacturers or distributors. If something isn’t right with fitment or condition, we’ll work with you to resolve it fairly.
NO GUESSWORK,
JUST PARTS THAT WORK.
Let’s finish that car.
PRODUCT DETAILS ▾
Supplier availability
- Carbon Fiber / Top Side Carbon Fiber (HOOD-1004-BKCF): Supplier reports available. Availability is subject to change.
- Carbon Fiber / Double-Sided Carbon Fiber (HOOD-1279-BKCF): Supplier reports available. Availability is subject to change.
Checked October 19, 2026. Restock estimates are not delivery promises.
The Extreme Online Store ZR1 Style vented extractor hood (part HOOD-1004-BKCF, top-side carbon; HOOD-1279-BKCF, double-sided carbon) is a carbon fiber front hood for the 2020-2026 Chevrolet Corvette C8. It is an aftermarket hood styled after the ZR1, not a GM part. Dual heat-extraction vents pull hot air out from under the hood, and the front vent lip is removable.
Fitment
- Chevrolet Corvette C8 Stingray and Z51, 2020-2026, coupe and convertible
- Chevrolet Corvette C8 Z06, 2023-2026, coupe and convertible
- Chevrolet Corvette C8 E-Ray, 2024-2026, coupe and convertible
- C8 ZR1: sources disagree on fitment, so message us before ordering for a ZR1
Specifications
- Part number (EOS): HOOD-1004-BKCF (top-side carbon fiber) or HOOD-1279-BKCF (double-sided carbon fiber)
- Style: ZR1-style vented extractor hood (aftermarket, not a GM part)
- Material: 3K twill weave carbon fiber with reinforced internal frame
- Finish: high-gloss UV-protected clear coat
- Vents: dual heat-extraction vents, removable front vent lip
- Mounting: factory mounting points and hardware; works with factory hinges and support struts
Good to know
Bolt-on with no drilling or cutting. Factory hardware is reused and no hardware is included. No installation manual is included, and professional installation is highly recommended to get alignment and latch engagement right.
FAQ
What is the difference between top-side and double-sided carbon?
HOOD-1004-BKCF has carbon fiber on the top surface. HOOD-1279-BKCF is carbon fiber on both the top and the underside.
Do I need to cut or drill anything?
No. It mounts to the factory points with the factory hardware.
Is it a genuine GM ZR1 hood?
No. It is an aftermarket carbon fiber hood with ZR1-inspired vents.
How long does shipping take?
Delivery times vary by part because many items ship directly from the manufacturer or distributor. Message us before ordering and we'll confirm current lead time.
Can I return it?
Yes. Returns are accepted within 30 days of delivery. The customer pays return shipping, and a restocking fee of up to 20% may apply.
WHY WE CARRY THIS ▾
We only list parts we’d run ourselves or recommend to a friend building a real car. If it feels vague, unverified, or inconsistent, it doesn’t make the cut.
- Fitment-first mindset — no “universal” roulette
- Brand reputation matters — we favor proven manufacturing
- Support that actually responds with real answers
WHAT TO EXPECT ▾
This is the clean path: correct fitment, clean install, and results that match the intent.
- Install-ready experience with correct mounting where provided
- Finish that holds up to real driving, not just photos
- Selections on this page drive the exact fitment shipped
TRUST, BUILT INTO THE PROCESS.
Anyone can list parts. We curate what belongs on a serious build. Our goal is simple: fewer surprises, cleaner installs, and confidence when you hit “Buy.”
Fitment checked
We prioritize vehicle-specific listings and clear selection logic so you’re not gambling on compatibility.
Brand discipline
Proven manufacturing and consistent quality matter more than hype. We bias toward what actually holds up.
Real support
If you have a question, you’ll get a human answer that helps you finish the build — not a copy-paste shrug.
Supplier availability
- Carbon Fiber / Top Side Carbon Fiber (HOOD-1004-BKCF): Supplier reports available. Availability is subject to change.
- Carbon Fiber / Double-Sided Carbon Fiber (HOOD-1279-BKCF): Supplier reports available. Availability is subject to change.
Checked October 19, 2026. Restock estimates are not delivery promises.
The Extreme Online Store ZR1 Style vented extractor hood (part HOOD-1004-BKCF, top-side carbon; HOOD-1279-BKCF, double-sided carbon) is a carbon fiber front hood for the 2020-2026 Chevrolet Corvette C8. It is an aftermarket hood styled after the ZR1, not a GM part. Dual heat-extraction vents pull hot air out from under the hood, and the front vent lip is removable.
Fitment
- Chevrolet Corvette C8 Stingray and Z51, 2020-2026, coupe and convertible
- Chevrolet Corvette C8 Z06, 2023-2026, coupe and convertible
- Chevrolet Corvette C8 E-Ray, 2024-2026, coupe and convertible
- C8 ZR1: sources disagree on fitment, so message us before ordering for a ZR1
Specifications
- Part number (EOS): HOOD-1004-BKCF (top-side carbon fiber) or HOOD-1279-BKCF (double-sided carbon fiber)
- Style: ZR1-style vented extractor hood (aftermarket, not a GM part)
- Material: 3K twill weave carbon fiber with reinforced internal frame
- Finish: high-gloss UV-protected clear coat
- Vents: dual heat-extraction vents, removable front vent lip
- Mounting: factory mounting points and hardware; works with factory hinges and support struts
Good to know
Bolt-on with no drilling or cutting. Factory hardware is reused and no hardware is included. No installation manual is included, and professional installation is highly recommended to get alignment and latch engagement right.
FAQ
What is the difference between top-side and double-sided carbon?
HOOD-1004-BKCF has carbon fiber on the top surface. HOOD-1279-BKCF is carbon fiber on both the top and the underside.
Do I need to cut or drill anything?
No. It mounts to the factory points with the factory hardware.
Is it a genuine GM ZR1 hood?
No. It is an aftermarket carbon fiber hood with ZR1-inspired vents.
How long does shipping take?
Delivery times vary by part because many items ship directly from the manufacturer or distributor. Message us before ordering and we'll confirm current lead time.
Can I return it?
Yes. Returns are accepted within 30 days of delivery. The customer pays return shipping, and a restocking fee of up to 20% may apply.
Share
