Forced Performance Blue L.O.P.E Ball Bearing Turbo WRX 2002-2007 / STI 2004-2021 | 2024000
Forced Performance Blue L.O.P.E Ball Bearing Turbo WRX 2002-2007 / STI 2004-2021 | 2024000
Forced Performance
Couldn't load pickup availability
- ✔ Verified fitment & authentic brands
- ✔ Secure checkout via Shopify, Stripe, and PayPal
- ✔ Enthusiast-run support — not a marketplace
- ✔ Fair resolution on damaged or incorrect orders
Every product is sourced from authorized manufacturers or distributors. If something isn’t right with fitment or condition, we’ll work with you to resolve it fairly.
NO GUESSWORK,
JUST PARTS THAT WORK.
Let’s finish that car.
PRODUCT DETAILS ▾
Product Fitment:
2002-2007 WRX
2004-2021 STI
Forced Performance built an affordable ball bearing Blue that was tolerant to the extreme range of oil pressures we see on Subaru engines. From this quest, the Low Oil Pressure Endurance (L.O.P.E.) Ball Bearing units were born. We have tested these on everything from 120+ psi balance shaft deleted 4g63's down to sad 7psi hot idle EJ25's and everything in between. These are insensitive to pressure issues and oil pick problems in high g force applications and will live a very long life in adverse conditions compared to a journal bearing turbo.
The L.O.P.E. FP Blue™ turbocharger features the 73mm HTZ™ compressor section with our 58MM stock appearing cover coupled to the 8cm2 turbine section. The FP Blue™ flows 57LB a minute and is capable of producing upwards of 475WHP. This turbo is available with either a stock style internal wastegate actuator or set up for an external. While this turbo looks like the JB Blue, it has some major tricks up its sleeve!
Specs:
- 58mm Stock Appearing Compressor Cover
- Internal Wastegate
- Oil supply line and gasket set included
- FP Blue™
- Compressor wheel - 73HTZ
- Flow rating - 57LB per minute
- CW Measurements - 52.6MM Inducer / 73MM Exducer
- TW Measurements - 60.8MM Inducer / 54MM Exducer
- Compressor Housing - 58MM Stock Appearing Cover
- Turbine Housing - FP 8CM Turbine Housing
- CHRA - L.O.P.E. Ball Bearing
WHY WE CARRY THIS ▾
We only list parts we’d run ourselves or recommend to a friend building a real car. If it feels vague, unverified, or inconsistent, it doesn’t make the cut.
- Fitment-first mindset — no “universal” roulette
- Brand reputation matters — we favor proven manufacturing
- Support that actually responds with real answers
WHAT TO EXPECT ▾
This is the clean path: correct fitment, clean install, and results that match the intent.
- Install-ready experience with correct mounting where provided
- Finish that holds up to real driving, not just photos
- Selections on this page drive the exact fitment shipped
TRUST, BUILT INTO THE PROCESS.
Anyone can list parts. We curate what belongs on a serious build. Our goal is simple: fewer surprises, cleaner installs, and confidence when you hit “Buy.”
Fitment checked
We prioritize vehicle-specific listings and clear selection logic so you’re not gambling on compatibility.
Brand discipline
Proven manufacturing and consistent quality matter more than hype. We bias toward what actually holds up.
Real support
If you have a question, you’ll get a human answer that helps you finish the build — not a copy-paste shrug.
Product Fitment:
2002-2007 WRX
2004-2021 STI
Forced Performance built an affordable ball bearing Blue that was tolerant to the extreme range of oil pressures we see on Subaru engines. From this quest, the Low Oil Pressure Endurance (L.O.P.E.) Ball Bearing units were born. We have tested these on everything from 120+ psi balance shaft deleted 4g63's down to sad 7psi hot idle EJ25's and everything in between. These are insensitive to pressure issues and oil pick problems in high g force applications and will live a very long life in adverse conditions compared to a journal bearing turbo.
The L.O.P.E. FP Blue™ turbocharger features the 73mm HTZ™ compressor section with our 58MM stock appearing cover coupled to the 8cm2 turbine section. The FP Blue™ flows 57LB a minute and is capable of producing upwards of 475WHP. This turbo is available with either a stock style internal wastegate actuator or set up for an external. While this turbo looks like the JB Blue, it has some major tricks up its sleeve!
Specs:
- 58mm Stock Appearing Compressor Cover
- Internal Wastegate
- Oil supply line and gasket set included
- FP Blue™
- Compressor wheel - 73HTZ
- Flow rating - 57LB per minute
- CW Measurements - 52.6MM Inducer / 73MM Exducer
- TW Measurements - 60.8MM Inducer / 54MM Exducer
- Compressor Housing - 58MM Stock Appearing Cover
- Turbine Housing - FP 8CM Turbine Housing
- CHRA - L.O.P.E. Ball Bearing
Share
